Dodajem knjige

Computer hardware/VGA documents/PCVISION.TXT

@@ -0,0 +1,71 @@
+The PC Vision plus is a framegrabber card.
+
+base+0  (R/W): Control register
+bit   0  Zoom. If set pixels are doubled when displayed.
+      1  Gain Adjust Enable.
+         If clear the Gain will be incremented or decremented
+         (depending on the DIR flag in bit 3) by writes to the Gain and
+         Offset Counter (base+4), if set the Gain is fixed.
+      2  Offset Adjust Enable.
+         If clear the Offset Voltage will be incremented or decremented
+         (depending on the DIR flag in bit 3) by writes to the Gain and
+         Offset Counter (base+4), if set the Offset Voltage is fixed.
+      3  Adjust Direction Control.
+         If set writes to the Gain and Offset Counter (base+4)
+         will increment the Gain and Offset counters if the appropriate bits
+         (bit 1 and 2) are clear.
+      4  Board Select. If set the frame buffer is mapped into PC memory.
+    5-7  Page select. Selects which of 8 64k pages are mapped in.
+
+base+1  (R/W): Lut Control Register
+bit 0-1  Look-Up Table Mode. Selects one of 4 Look Up Table banks
+         for manipulation.
+           0= Red LUT, 1= Green LUT, 2= Blue LUT, 3= Input LUT.
+    2-4  Input Lut Select. Selects one of 8 Input LUTs
+    5-7  Output Lut Select. Selects one of 8 LUTs for each color.
+
+base+2  (R/W): Lut Address Register
+bit 0-7  Offset into the LUT selected by the Lut Control Register (base+1).
+         Reads and writes to the LUT Data Port (base+3) will go to this entry.
+
+base+3  (R/W): Lut Data Port
+bit 0-7  This port directly accesses the offset selected by the Lut Address
+         Register (base+2) in the LUT selected by the Lut Control Register
+         (base+1).
+
+base+4  (W): Gain and Offset Counter
+bit 0-7  Each write to this register will increment or decrement (depending on
+         the Direction flag in bit 3 of base+4) the Gain and Offset Voltage
+         Counters if Adjust is enabled (base+4 bit 1 and 2).
+
+base+5  (R/W): Acquire and Status register
+bit   0  Video Input Select. If set video input is taken from Channel 1,
+         else from Channel 0.
+      1  Clock Source Select. If set clock source is a Phase-Locked Loop,
+         else a Crystal Oscillator.
+      2  (R) Odd/Even Status. Odd field displayed if set.
+      3  (R) Last Field Status. If clear the PCVISION plus is acquiring
+         the last field of a grab.
+      4  (R) Vertical Blank Status.
+             Vertical Blank active if clear (1.4ms).
+      5  (R) Horizontal Blank Status.
+             Horizontal blank active if clear (12.7us).
+    6-7  Acquire Mode.
+           0: Freeze. Terminate operation.
+           1: Clear.  Clear video memory.
+           2: Snap.   Acquire a single image.
+           3: Grab.   Continuously acquire images.
+         When read 0 indicates the system is not busy.
+
+base+6  (R/W): Pan Register
+base+7  (R/W): Scroll Register
+base+8  (R/W): Memory Access Control Register
+base+9  (R/W): Host Mask Register
+bit 0-7  Each bit set prevents the corresponding bit plane from changes
+         during host access and clear operations.
+
+base+Ah (R/W): Video Mask Register
+bit 0-7  Each bit set prevents the corresponding bit plane from changes
+         during acquire operations.
+
+base+Bh (R/W): Pixel Buffer Register